Fully Gas Safe Registered
London's boiler servicing & compliance specialists
Annual servicing, landlord Gas Safety Certificates and service plans, carried out by Gas Safe registered engineers and confirmed in writing.
Your Annual Service
Full internal inspection
Heat exchanger, seals, ignition, flue and ventilation checked against the manufacturer's checklist.
Combustion analysis
Confirms the boiler is burning efficiently and safely, not just running.
Safety device testing
The devices that shut the boiler down if a fault develops are tested on every visit.
Escalation, honestly
If a fault is found during a service, it's explained plainly and quoted separately before any further work.
Written service record handed over on every visit
100%
Gas Safe
Every engineer, fully registered
33
Boroughs
Full Greater London coverage
12
Month CP12
Renewal reminders set for you
15
Min quote
Fast free no-obligation reply
Servicing & compliance, done properly
Every service is carried out to the same written checklist. Pick the one that matches your situation.
Annual Boiler Service
A full manufacturer-checklist service from fully Gas Safe registered engineers, with a written record for your warranty.
Landlord Gas Safety Certificate
CP12 inspections covering every gas appliance, with renewal reminders so cover never lapses.
Boiler Service Plans
Your annual service scheduled automatically, with optional call-out cover on top.
Central Heating Health Check
Beyond the boiler — radiators, controls and system pressure checked as a whole.
Commercial Boiler Servicing
Scheduled maintenance for offices, restaurants and managed buildings, with compliance paperwork.
Pre-Winter Boiler Checks
Book before the season starts, while appointment slots are still easy to get.
What your appointment day looks like
- Booking
Confirm your appointment window
Tell us your boiler's make and model and where it's located, so the right checklist and parts knowledge are ready.
- On site
Full checklist, not a shortcut
Internal components, flue, ventilation, combustion and safety devices — the same checklist every visit, every boiler.
- Wrap-up
Written record handed over
You get a written service record or certificate before the engineer leaves, not emailed days later.
- After the visit
Renewal reminder set
Your next service or CP12 renewal date is noted, so compliance doesn't depend on you remembering.
Before your engineer arrives
Have your boiler's details ready
Make and model, and roughly how old it is — this helps us bring the right parts knowledge to the visit.
Note anything unusual
Strange noises, pressure that keeps dropping, or rooms that heat unevenly — mention these when you book.
Find your last service record
If you have one, having it to hand helps the engineer see what's changed since the last visit.
Ask about combining visits
Landlords can often combine an annual service with a Gas Safety Certificate inspection in one call-out.
Built for compliance that can't slip
Fully Gas Safe registered
Every visit is carried out by a fully Gas Safe registered engineer — the legal minimum for any gas work, not an optional credential.
A written record every time
You leave every visit with a written service record or certificate — the paperwork your warranty and your tenants actually need.
Renewal reminders, not guesswork
Service and CP12 renewal dates are tracked so cover doesn't lapse by accident between one year and the next.
Quoted before we start
Boiler make, model and access all affect the price — we confirm it before booking, not after the visit.
tested every visit
A test that backs up the paperwork
We don't call a service done because the boiler switched on. Combustion analysis and safety device testing confirm it's actually running safely.
- Combustion analysis — Confirms the boiler is burning gas efficiently and safely, not just running.
- Safety device testing — The components that shut the boiler down if a fault develops are tested on every visit.
- Whole-appliance CP12 checks — Every gas appliance, fitting and flue covered by your landlord obligations, inspected and certified.
- System pressure & controls — Radiators, thermostats and system pressure checked as part of a wider health check.
Booking a service takes three steps
- 1
Book Your Slot
Pick a date that suits you. We confirm a realistic appointment window and what the visit covers.
- 2
Full Inspection On Site
A fully Gas Safe registered engineer works through the manufacturer's checklist, not a shortened version.
- 3
Written Record, Explained
You get a written service record or certificate, and anything found is explained before any follow-up work is quoted.
Get a free quote
Tell us about the boiler — free, no-obligation quote. No spam, no mailing lists.
Areas we cover
Fully Gas Safe registered engineers across all 33 Greater London boroughs.
| Region | Boroughs served |
|---|---|
| Central | City of London, Westminster, Kensington and Chelsea, Camden |
| North | Barnet, Enfield, Haringey, Islington, Harrow, Brent |
| East | Hackney, Tower Hamlets, Newham, Waltham Forest, Redbridge, Barking and Dagenham, Havering |
| South | Croydon, Lambeth, Southwark, Lewisham, Greenwich, Bromley, Bexley, Merton, Sutton, Wandsworth |
| West | Ealing, Hammersmith and Fulham, Hillingdon, Hounslow, Richmond upon Thames, Kingston upon Thames |
Don't see your borough listed by name above? See the full coverage list.
Due a service or a CP12? Book before the season gets busy.
Tell us the boiler make and model — we reply with the fee and the earliest appointment window.
What Londoners say after a service
“Every engineer showed up fully Gas Safe registered and left a written record — exactly what my mortgage lender asked for.”
“Not a five-minute glance. My CP12 was sorted well before my tenants even noticed the renewal was due.”
“Quoted upfront, boiler make and model and all. No surprise on the invoice when the engineer left.”
Practical advice for keeping your boiler compliant
All guidesBoiler Servicing
How to Choose a Boiler Service Company in London: What Actually Matters
4 min readLandlord Compliance
Landlord Gas Safety Certificate (CP12) Explained: What London Landlords Need to Know
4 min readPricing & Costs
What Affects the Cost of a Boiler Service? The Real Factors Explained
3 min readMaintenance & Compliance
Signs Your Boiler Needs Attention Before Its Next Scheduled Service
3 min read
Common questions about boiler servicing
How often should my boiler be serviced?
Once a year, in almost all cases — this is the standard manufacturer recommendation and the usual condition attached to a boiler warranty. Booking before the heating season starts avoids the autumn rush.
Do you offer landlord Gas Safety Certificates (CP12)?
Yes. We inspect every gas appliance covered by your landlord obligations and issue the certificate, with a reminder set ahead of the 12-month renewal.
Are your engineers Gas Safe registered?
Yes — fully Gas Safe registered, which is the legal requirement for anyone working on gas appliances in the UK. Ask to see an engineer's ID card on any visit, from us or anyone else.
Can I combine a boiler service with a Gas Safety Certificate?
Yes — many landlords combine both in a single visit, since the certificate inspection covers the boiler anyway. It saves arranging a second appointment.
What's included in a service plan?
Plans range from 'annual service only' to 'service plus call-out cover'. We explain exactly what each tier includes before you choose, so there's no ambiguity about what's covered.
How much does a boiler service cost?
It depends on the boiler's make, model and how accessible it is. We confirm a quote before booking rather than applying a flat rate to every home — see our pricing page for typical UK market ranges.
What areas of London do you cover?
We cover all London boroughs. Our network of engineers is positioned to reach any postcode in Greater London for scheduled servicing and compliance visits.
Do you service commercial boilers?
Yes — offices, restaurants and managed buildings, scheduled around business hours where possible, with compliance paperwork suited to a facilities management file.